XS4All connection
At the PCextreme office we have a XS4All VDSL2 connection which has native IPv6. We get a /48 from XS4All.
I wrote two earlier blogposts about getting the Cisco 887VA router setup which might be of interest before you continue reading:
IPv6 Prefix Delegation
From XS4All we get a /48 routed to our office using DHCPv6 Prefix Delegation. We are experimenting and testing with Docker at the office where we also want to test the IPv6 capabilities of Docker.
The goal was to sub-delegate /60 subnets out of a /56 towards clients internally. I had to figure out how to get this configured on Cisco IOS.
- We get a /48 delegated from XS4All
- The first /56 is used for our local networks (LAN, Guest and Servers)
- The second /56 is used as a pool to delegate /60 subnets from
Sipcalc
To calculate the IPv6 subnets used the tool ‘sipcalc’. I needed to find the second /56 in our /48:
sipcalc -S 56 2001:980:XX::/48
The output is rather long, so I trimmed it a bit:
-[ipv6 : 2001:980:XX::/48] - 0
[Split network]
Network - 2001:0980:XX:0000:0000:0000:0000:0000 -
2001:0980:XX:00ff:ffff:ffff:ffff:ffff
Network - 2001:0980:XX:0100:0000:0000:0000:0000 -
2001:0980:XX:01ff:ffff:ffff:ffff:ffff
Network - 2001:0980:XX:0200:0000:0000:0000:0000 -
2001:0980:XX:02ff:ffff:ffff:ffff:ffff
...
...
Network - 2001:0980:XX:ff00:0000:0000:0000:0000 -
2001:0980:XX:ffff:ffff:ffff:ffff:ffff
-
In this case 2001:0980:XX:0100:0000:0000:0000:0000:/56 is the second /56 in our /48.
Cisco IOS
Some searching brought me to cisco.com which had some examples.
Eventually it was actually quite easy to get it working.
Configuration
You need a DHCPv6 pool inside the Cisco and tell it to start a DHCPv6 server on the proper interface.
ipv6 dhcp pool local-ipv6
prefix-delegation pool local-ipv6-pd-pool lifetime 3600 1800
dns-server 2001:888:0:6::66
dns-server 2001:888:0:9::99
domain-name pcextreme.nl
interface Vlan1
ip address 192.168.5.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ipv6 address xs4all-prefix ::1/64
ipv6 enable
ipv6 nd other-config-flag
ipv6 nd ra interval 30
ipv6 nd ra dns server 2001:888:0:6::66
ipv6 nd ra dns server 2001:888:0:9::99
ipv6 dhcp server local-ipv6 rapid-commit
ipv6 mld query-interval 60
ipv6 local pool local-ipv6-pd-pool 2001:980:XX:100::/56 60
That’s all!
Asking for a Prefix
On my Ubuntu desktop I could now request a subnet:
wido@wido-desktop:~$ sudo dhclient -6 -P -v eth0
Internet Systems Consortium DHCP Client 4.2.4
Copyright 2004-2012 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Bound to *:546
Listening on Socket/eth0
Sending on Socket/eth0
PRC: Soliciting for leases (INIT).
XMT: Forming Solicit, 0 ms elapsed.
XMT: X-- IA_PD d5:68:28:08
XMT: | X-- Request renew in +3600
XMT: | X-- Request rebind in +5400
XMT: Solicit on eth0, interval 1060ms.
RCV: Advertise message on eth0 from fe80::da67:d9ff:fe81:bcec.
RCV: X-- IA_PD d5:68:28:08
RCV: | X-- starts 1455279332
RCV: | X-- t1 - renew +900
RCV: | X-- t2 - rebind +1440
RCV: | X-- [Options]
RCV: | | X-- IAPREFIX 2001:980:XX:100::/60
RCV: | | | X-- Preferred lifetime 1800.
RCV: | | | X-- Max lifetime 3600.
RCV: X-- Server ID: 00:03:00:01:d8:67:d9:81:bc:f0
RCV: Advertisement recorded.
PRC: Selecting best advertised lease.
As you can see I got 2001:980:XX:100::/60 delegated to my desktop.
IPv6 routes
After I asked for a subnet on my desktop this is how the routes look like. You can see a /60 being routed to my Link-Local Address.
firewall-vdsl-veldzigt#show ipv6 route
IPv6 Routing Table - default - 8 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
B - BGP, HA - Home Agent, MR - Mobile Router, R - RIP
H - NHRP, D - EIGRP, EX - EIGRP external, ND - ND Default
NDp - ND Prefix, DCE - Destination, NDr - Redirect, O - OSPF Intra
OI - OSPF Inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2, ON1 - OSPF NSSA ext 1
ON2 - OSPF NSSA ext 2, la - LISP alt, lr - LISP site-registrations
ld - LISP dyn-eid, a - Application
S ::/0 [1/0]
via Dialer0, directly connected
S 2001:980:XX::/48 [1/0]
via Null0, directly connected
C 2001:980:XX::/64 [0/0]
via Vlan1, directly connected
L 2001:980:XX::1/128 [0/0]
via Vlan1, receive
C 2001:980:XX:1::/64 [0/0]
via Vlan300, directly connected
L 2001:980:XX:1::1/128 [0/0]
via Vlan300, receive
S 2001:980:XX:100::/60 [1/0]
via FE80::C23F:D5FF:FE68:XX, Vlan1
L FF00::/8 [0/0]
via Null0, receive
firewall-vdsl-veldzigt#
The subnet is working now and I can use it to hand it out to my Docker containers.
